Probleme mit der Hintergrundfarbe

also :

Reading and converting images: 
Supported file formats 
This verifies that your ImageMagick installation is able to read the nine default file formats; JPG, GIF, PNG, TIF, BMP, PCX, TGA, PDF, AI. The tool 'identify' will be used to read the pixeldimensions of non-web formats. The tool 'convert' is used to read the image and write a temporary JPG-file

 
Test skipped 
Use of ImageMagick has been disabled in the configuration. Refer to section 'Basic Configuration' to change or review you configuration settings

 
Writing images: 
Writing GIF and PNG 
This verifies that ImageMagick is able to write GIF and PNG files. The GIF-file is attempted compressed with LZW by the t3lib_div::gif_compress() function.

 
Test skipped 
Use of ImageMagick has been disabled in the configuration. Refer to section 'Basic Configuration' to change or review you configuration settings

 
Scaling images: 
Scaling transparent images 
This shows how ImageMagick reacts when scaling transparent GIF and PNG files.

 
Test skipped 
Use of ImageMagick has been disabled in the configuration. Refer to section 'Basic Configuration' to change or review you configuration settings

 
Combining images: 
Combining images 
This verifies that the ImageMagick tool, 'combine'/'composite', is able to combine two images through a grayscale mask.
If the masking seems to work but inverted, that just means you'll have to make sure the invert flag is set (some combination of im_negate_mask/im_imvMaskState)

 
Test skipped 
Use of ImageMagick has been disabled in the configuration. Refer to section 'Basic Configuration' to change or review you configuration settings

 
Create image from file 
   
7.3 K, 170x136 pixels  46 K, 170x136 pixels 
File size is very different from reference 
7437  47083 


 
Render text with TrueType font 
   
560 , 170x136 pixels  446 , 170x136 pixels 
File size is very different from reference 
560  446 


 
Render text with TrueType font using 'niceText' option 
Test is skipped!

Use of ImageMagick has been disabled in the configuration. ImageMagick is needed to generate text with the niceText option. Refer to section 'Basic Configuration' to change or review you configuration settings

 
Render 'niceText' with a shadow under 
Test is skipped!

Use of ImageMagick has been disabled in the configuration. ImageMagick is needed to generate shadows. Refer to section 'Basic Configuration' to change or review you configuration settings

also in der php info steht, das es gd version 1.6.2 or higher ist,

sorry aber so den plan hab ich von linux und co nicht wirklich!
danke aber das du mir hilst

Hier noch die localconfig.php, die man editieren kann, vielleicht findest du hier ja fehler, und änderst sie einfach ab, ich kopier sie dann zurück. oder geht das nicht?

<?php
/*

 NOTICE ABOUT CONFIGURATION:
 
 Typo3 offers an install tool with three simple steps to configure the most necessary options such as the database.
 Please go to typo3/install/index.php to configure Typo3 and install the database tables.
 Just make sure this file is writable by PHP - otherwise the Install Tool will not succeed with the configuration.

 If you want to manually enter values into this file take a look at t3lib/config_default.php which is the file that includes this one. By looking into this file you should be able to figure out which variables set which values.
 
*/

$TYPO3_CONF_VARS["SYS"]["sitename"] = 'QuickStart';
$TYPO3_CONF_VARS["EXT"]["extList"] = 'tsconfig_help,context_help,extra_page_cm_options,rte,impexp,sys_note,tstemplate,tstemplate_ceditor,tstemplate_info,tstemplate_objbrowser,tstemplate_analyzer,tstemplate_styler,func_wizards,wizard_crpages,wizard_sortpages,lowlevel,install,belog,beuser,phpmyadmin,aboutmodules,imagelist,setup,taskcenter,sys_notepad,taskcenter_recent,taskcenter_rootlist,info_pagetsconfig,viewpage,tt_guest,mininews,tt_board,sys_todos,sys_workflows,conf_userts';       // Modified or inserted by Typo3 Extension Manager. 

// Setting Install Tool password to the default "joh316":
$TYPO3_CONF_VARS["BE"]["installToolPassword"] = "bacb98acf97e0b6112b1d1b650b84971";

## INSTALL SCRIPT EDIT POINT TOKEN - all lines after this points may be changed by the install script!

$typo_db_username = 'web10';	//  Modified or inserted by TYPO3 Install Tool.
$typo_db_password = 'ZdvB3BlD';	//  Modified or inserted by TYPO3 Install Tool.
$typo_db_host = 'localhost';	//  Modified or inserted by TYPO3 Install Tool.
$typo_db = 'usr_web10_1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["BE"]["installToolPassword"] = '75fc23d103c20bf3e6561c553cdf108b';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["im_noScaleUp"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["enable_typo3temp_db_tracking"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["SYS"]["sitename"] = 'Landjugend Wistedt';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["SYS"]["loginCopyrightWarrantyProvider"] = 'asTec-Media';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["SYS"]["loginCopyrightWarrantyURL"] = 'http://www.astec-media.de';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["SYS"]["loginCopyrightShowVersion"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["BE"]["warning_email_addr"] = 'a.steinert@astec-media.de';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["BE"]["disable_exec_function"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["gdlib_png"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["im_combine_filename"] = '';       // Modified or inserted by TYPO3 Install Tool. 
$TYPO3_CONF_VARS["GFX"]["im_version_5"] = '1';       // Modified or inserted by TYPO3 Install Tool. 
$TYPO3_CONF_VARS["GFX"]["im_path_lzw"] = '/usr/X11R6/bin/ ';       // Modified or inserted by TYPO3 Install Tool. 
// Updated by TYPO3 Install Tool 07-04-2005 17:08:07
$TYPO3_CONF_VARS['EXT']['extList'] = 'tsconfig_help,context_help,extra_page_cm_options,rte,impexp,sys_note,tstemplate,tstemplate_ceditor,tstemplate_info,tstemplate_objbrowser,tstemplate_analyzer,tstemplate_styler,func_wizards,wizard_crpages,wizard_sortpages,lowlevel,install,belog,beuser,phpmyadmin,aboutmodules,imagelist,setup,taskcenter,sys_notepad,taskcenter_recent,taskcenter_rootlist,info_pagetsconfig,viewpage,mininews,tt_board,sys_todos,sys_workflows,conf_userts';	//  Modified or inserted by TYPO3 Extension Manager.
// Updated by TYPO3 Extension Manager 08-04-2005 13:18:47
$TYPO3_CONF_VARS["GFX"]["im"] = '0';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["im_path"] = '/usr/X11R6/bin/';       // Modified or inserted by TYPO3 Install Tool. 
$TYPO3_CONF_VARS["GFX"]["im_negate_mask"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["im_imvMaskState"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
$TYPO3_CONF_VARS["GFX"]["im_mask_temp_ext_gif"] = '1';	//  Modified or inserted by TYPO3 Install Tool.
// Updated by TYPO3 Install Tool 08-04-2005 22:47:51
?>

So jetzt hab ich mal deine Config so angepasst dass image magic funktionieren ... jetzt sollten die Image Tests alle funktionieren und solltes kein skipping mehr bekommen. Meiner meinung nach sollte auch dein problem mit der falschen hintergrundfrabe gelöst sein..

[GFX]:
$TYPO3_CONF_VARS["GFX"]
Configuration of the image processing features in TYPO3. 'IM' and 'GD' are short for ImageMagick and GD library respectively.


[image_processing]
Boolean. Enables image processing features. Disabling this means NO image processing with either GD or IM!

[GFX][image_processing] = 1



[thumbnails]
Boolean. Enables the use of thumbnails in the backend interface. Thumbnails are generated by IM/partly GD in the file typo3/thumbs.php

[GFX][thumbnails] = 0



[thumbnails_png]
Bits. Bit0: If set, thumbnails from non-jpegs will be 'png', otherwise 'gif' (0=gif/1=png). Bit1: Even JPG's will be converted to png or gif (2=gif/3=png)

[GFX][thumbnails_png] = 0



[noIconProc]
Boolean. If true, icons are never processed with overlays for hidden, starttime, endtime etc. They must be available pre-processed. If this is disabled, do so only if you have full image processing capabilities on the server for TYPO3.

[GFX][noIconProc] = 1



[gif_compress]
Boolean. Enables the use of the t3lib_div::gif_compress() workaround function for compressing giffiles made with GD or IM, which probably use only RLE or no compression at all.

[GFX][gif_compress] = 1



[imagefile_ext]
Commalist of file extensions perceived as images by TYPO3. List should be set to 'gif,png,jpeg,jpg' if IM is not available. Lowercase and no spaces between!

[GFX][imagefile_ext] = gif,jpg,jpeg,png



[gdlib]
Boolean. Enables the use of GD.

[GFX][gdlib] = 1



[gdlib_png]
Boolean. Enables the use of GD, with PNG only. This means that all items normally generated as gif-files will be png-files instead!

[GFX][gdlib_png] = 1



[gdlib_2]
String/Boolean. Set this if you are using the new GDlib 2.0.1+. If you don't set this flag and still uses GDlib2, you might encounter strange behaviours like black images etc. This feature might take effect only if ImageMagick is installed and working as well! You can also use the value "no_imagecopyresized_fix" - in that case it will NOT try to fix a known issue where "imagecopyresized" does not work correctly.

[GFX][gdlib_2] = 0



[im]
Boolean. Enables the use of IM.

[GFX][im] = 1



[im_path]
Path to the IM tools 'convert', 'combine', 'identify'. Version 4.2.9 of ImageMagick is highly recommended due to features and speed!

[GFX][im_path] = 



[im_path_lzw]
Path to the IM tool 'convert' with LZW enabled! See 'gif_compress'. If your version 4.2.9 of ImageMagick is compiled with LZW you may leave this field blank AND disable the flag 'gif_compress'! Tip: You can call LZW 'convert' with a prefix like 'myver_convert' by setting this path with it, eg. '/usr/bin/myver_' instead of just '/usr/bin/'.

[GFX][im_path_lzw] = /usr/X11R6/bin



[im_version_5]
Boolean. Set this if you're using IM 5+. If this is set, 'im_negate_mask', 'im_no_effects' and 'im_mask_temp_ext_gif' are automatically configured for use with ImageMagick version 5 +

[GFX][im_version_5] = 1



[im_negate_mask]
Boolean. Indicates if the mask images should be inverted first. This depends of the ImageMagick version. Below ver. 5.1 this should be false. Above ImageMagick version 5.2+ it should be true. Just set the flag if the masks works opposite the intension!

[GFX][im_negate_mask] = 1



[im_imvMaskState]
Boolean. If set, the 'im_negate_mask' state is inverted. This is very useful with newer versions of IM5 (at least 5.4.3+) where the 'im_version_5' setting will set 'im_negate_mask' which will eventually be wrong... Halleluja for ImageMagick - have I ever regreted using that package...

[GFX][im_imvMaskState] = 0



[im_no_effects]
Boolean. This is necessary if using ImageMagick 5+. Approved version for using effects is version 4.2.9. Effects in Imagemagick 5+ tends to render very slowly! Therefore this must be disabled in order not to perform sharpen, blurring and such. (However lately IM5 is allowed for effects again, but syntax has changed!)

[GFX][im_no_effects] = 1



[im_v5effects]
Integer -1,0,1. 0=disabled. -1=Do not sharpen images by default. 1=All; blur and sharpening is allowed in ImageMagick again and the 'im_no_effects' flag is cancelled. Blurring and sharpening has new syntaxes though. See class.t3lib_stdgraphic.php for details.

[GFX][im_v5effects] = 0



[im_mask_temp_ext_gif]
Boolean. This should be set if ImageMagick is version 5+. This is used in class tslib_cObj.php for masking images and the extension png is normally used because it's faster than gif for temporary files. But png seems not to work with some IM 5+ versions, so...

[GFX][im_mask_temp_ext_gif] = 1



[im_mask_temp_ext_noloss]
String. Loss-less ImageMagick extension to use for mask processing in temporary filenames. Normally 'miff' (ImageMagick's OWN format) will do fine. However at least IM 5.4.9 has proved not to be able to write to its own file format which forced me to add this option. You can try and set this to tif/png/jpg if some masking doesn't work the way it should.

[GFX][im_mask_temp_ext_noloss] = miff



[im_noScaleUp]
Boolean. If set, images are not being scaled up if told so (in t3lib/stdgraphics.php)

[GFX][im_noScaleUp] = 1



[im_combine_filename]
String. Latest ImageMagick versions has changed the name of combine to composite. Configure here if needed.

[GFX][im_combine_filename] = composite



[im_noFramePrepended]
Boolean. If set, the the [x] frame indicator is NOT prepended to filenames in stdgraphic. Some IM5+ version didn't work at all with the typical [0]-prefix, which allow multipage pdf's and animated gif's to be scaled only for the first frame/page and that seriously cuts down rendering time. Set this flag only if your ImageMagick version cannot find the files. Notice that changing this flag causes temporary filenames to change, thus the server will begin scaling images again which were previously cached.

[GFX][im_noFramePrepended] = 0



[enable_typo3temp_db_tracking]
Boolean. If set, then all files in typo3temp will be logged in a database table. In addition to being a log of the files with original filenames, it also serves to secure that the same image is not rendered simultaneously by two different processes.

[GFX][enable_typo3temp_db_tracking] = 1



[TTFLocaleConv]
String. Enter locale conversion string used to recode input to TrueType functions. Eg. 'cp1250..UTF-8'. Works ONLY if 'recode' is enabled in PHP. Depreciated from ver. 3.6.0 of TYPO3. Set up [BE][forceCharset] as strings are automatically converted from databsae charset to UTF-8.

[GFX][TTFLocaleConv] =



[TTFdpi]
Integer. Enter how many dpi the FreeType module uses. Freetype1 should be set to 72. Freetype2 should be set to 96 (otherwise fonts are rendered way bigger than FreeType1). This works as a global scaling factor for Freetype.

[GFX][TTFdpi] = 72

[/quote]

Mache "Nicetext = 0" und es wird gehen🙂

Man kann dann im Typo Setup auch irgentwo maskinvert=1 oder so in der art einstellen das behebt das problem komplett und du kannst auch wieder nicetext = 1 nutzen

Stimmt, wenn ich nicetext auf 0 setze geht es, aber wo bitte ändere ich das im setup, das ich es normal setzen kann?

stell im installtool mal an diesen settings rum:

[im_negate_mask] 
Boolean. Indicates if the mask images should be inverted first. This depends of the ImageMagick version. Below ver. 5.1 this should be false. Above ImageMagick version 5.2+ it should be true. Just set the flag if the masks works opposite the intension!

[GFX][im_negate_mask] = 1


 
[im_imvMaskState] 
Boolean. If set, the 'im_negate_mask' state is inverted. This is very useful with newer versions of IM5 (at least 5.4.3+) where the 'im_version_5' setting will set 'im_negate_mask' which will eventually be wrong... Halleluja for ImageMagick - have I ever regreted using that package...

[GFX][im_imvMaskState] = 0

und schau mal nach ob die IM5.x oder IM 4.x auf dem server hast da gibt es auch noch ein paar einstellungen zu.

ich hab im 5.4.3 auf dem server, wo und was soll ich da denn rumstellen?
bitte eine genaue anleitung, da ich nicht linux erfahren bin, himmel auch, das sollte ich echt mal ändern!

im installations tool sind die einstellungen so wie du es gesagt hast, aber es funzt eben nur wenn nicetext auf 0 gesetzt ist, und das soll ja nicht so sein.
oder meintest du das sie genau umgedreht sein sollen, oder wie?

im typo3 backend unter install..

Sorry, aber irgendwie funzt das bei mir nicht!

ich weiß auch nicht genau was ich nun ändern soll, da ich alle versionen ausprobiert habe.
wie kann mir denn jemand weiter helfen? (was soll ich hier posten, z.b. wegen der einstellungen)

sprech mich icq an oder mittwoch mittag dann mach ich dir das fix im backend

ich wollte es dir nur für die zukunft sagen,
du solltest eigentlich dateien wie die localconf.php
nicht öffentlich posten, aufgrund von zeilen wi diesen

$typo_db_username = 'web10';   //  Modified or inserted by TYPO3 Install Tool. 
$typo_db_password = 'ZdvB3BlD';   //  Modified or inserted by TYPO3 Install Tool. 
$typo_db_host = 'localhost';   //  Modified or inserted by TYPO3 Install Tool. 
$typo_db = 'usr_web10_1';   //  Modified or inserted by TYPO3 Install Tool. 
$TYPO3_CONF_VARS["BE"]["installToolPassword"] = '75fc23d103c20bf3e6561c553cdf108b';

Bei mir stellt sich das gleiche Problem. Zusammengefasst:

Basis/Vorgehen

- UNIX Server mit vorinstalliertem IM 6.2.2 unter '/usr/bin/'
- InstallTool 'All Config' alle Flag IM5 aktiviert
- InstallTool 'ImageProcessing' alle Test soweit in Ordnung
- Ausnahme: Combining Images -> dort Überlagerung vertauscht
- Unterschiede Bilder: bei meinem grüner Balken oben, Referenzbild grüner Balken unten
- Hinweis: Es würde nur eine schwarz/weiss Maske verwendet, Graustufenverläufe nicht
- Versuch: Unter 'AllConfig' InstallTool' mit den Invert Flags IM5 herumgespielt
- auch Combine durch Composite ersetzt
- keine Verbesserung, Test verlief immer gleich (alles ok, ausser Combine/Composite

Frage: Müssen zwischen den einzelnen Tests die Bilder im temp-Pfad manuell gelöscht werden?

Auswirkung auf Website:

- Grafische Buttons werden 'invertiert' dargestellt
- Schriftfarbe als Buttonfarbe
- Einige Grafiken nur dunkel oder nur weiss dargestellt
- mitunter mit oder ohne Titelschrift aus Datenbank

Neuer Versuch:

- vorcompilierte Version des IM 4.2.9. in meinen lokalen Userpfad abgelegt
- Unter Install-Tool: 'AllConfig' Pfadangaben angepasst
- 1. Versuch Pfad in Form: '/home/(ich)/public_html/cms/imagemagick-linux/'
- Alle Flags wieder auf IM4 zurückgesetzt
- Bilder konnten nicht gelesen werden, alle Test erfolglos
- Versuch mit Pfad: http://localhost/home/(ich)/public_html/cms/imagemagick-linux/
- Einlesen klappte nun, allerdings einige Tests, so auch combine erneut nicht

Was noch möglich? Falls einer bei Euch das Problem mit der 6er Version des IM lösen konnte, wäre ich über eine Info sehr dankbar.